VADDIO AV Bridge 2x1 Complete Manual Download

Page: 75 / 93

network settings get

Returns the device's current network settings, including MAC addres, IP address, netmask, and gateway.

Synopsis

network settings get

Example

network settings get

Name:

eth0:WAN

MAC Address:

00:04:a3:85:0a:ee

IP Address:

10.30.240.187

Netmask:

255.255.255.0

VLAN:

Disabled

Gateway:

10.30.240.254

Hostname:

bergstrom

system standby

Gets, sets, or toggles the camera controller's current standby status.

Cameras currently connected to the video inputs may also go to standby when you set

system standby

. This depends on how the device is configured.

Synopsis

system standby { get | on | off | toggle }

Options

get

Returns the device's current standby status.

Sets the device to standby mode.

off

Brings the device out of standby mode.

toggle

Changes the device's standby status.

Examples

system standby get

Returns the factory reset status in this form:

standby:

off

(the device is not in standby mode.)

system standby on

Immediately sets the device to standby mode.

system reboot

Reboots the system either immediately or after the specified delay. Note that a reboot is required when
resetting the system to factory defaults (system factory-reset).

Synopsis

system reboot [<seconds>]

Options

The number of seconds to delay the reboot.

Examples

system reboot

The system is going down for reboot NOW! avb2x1-D8-80-39-62-A7-C5

Reboots the system immediately.

system reboot 30

Reboots the system in 30 seconds. The response is in the same form; the system
message appears at the end of the delay.

Complete Manual for the AV Bridge 2x1 Presentation Switcher

Summary of Contents for AV Bridge 2x1






























































































Search results

Summary of Contents for AV Bridge 2x1

Reviews:

Related manuals for AV Bridge 2x1

Brands by name

Popular brands

VADDIO AV Bridge 2x1, Complete Manual

Search results

Summary of Contents for AV Bridge 2x1

Reviews:

Related manuals for AV Bridge 2x1

Brands by name

Popular brands