Initial Device Set-Up Using the Vaddio Deployment Tool
Be sure you have the current version of the Vaddio Deployment Tool. This tool is available as a free
download at
https://info.legrandav.com/VaddioDeploymentTool
. If you have a copy of the tool already,
compare its version information to the version shown on the release notes. You can find this document at
https://www.legrandav.com/en/products/vaddio/accessories/vaddio_deployment_tool
under the
Resources tab.
To complete the initial device set-up with the Vaddio Deployment Tool:
1. Download and install the Vaddio Deployment Tool if you have not done so already, then open it.
2. Power up the AV Bridge 2x1 device if you have not done so already.
3. On the Find Devices page, click Scan. If the scan does not locate the AV Bridge 2x1 device, your
computer may be on a different subnet from the device. Click Advanced and specify the appropriate
portion of the network to scan.
4. In the list of equipment that the scan discovers, locate the devices marked Not Set Up.
5. For each device that you need to work with, click the Not Set Up button and set the admin password on
the device detail page that opens.
The device shows up as unlocked after you set the admin password.
After the password is set, you will be able to log in to the administrative web interface to complete system
administration and other configuration tasks.
14
Complete Manual for the AV Bridge 2x1 Presentation Switcher
