VADDIO AV Bridge 2x1 Complete Manual Download

Page: 40 / 93

RTMP Streaming Settings

TREAMING PAGE

To use RTMP streaming, you must have an account with a streaming service.

Notes

When RTMP streaming is selected and a content service provider is configured, the device streams to the
service until you stop the stream. Configure RTMP streaming before enabling it.

The RTMP stream can only be viewed from the content service provider. No local display or preview is
available.

To configure an RTMP streaming service:

1. Select RTMP streaming, then select Settings.

2. Expand the information box for the service.

3. Enter the name of the service.

4. Paste in the key and URL(s) provided by the service. This key is only used for sending video to the

service. It is not needed to view the stream.

Complete Manual for the AV Bridge 2x1 Presentation Switcher

Summary of Contents for AV Bridge 2x1






























































































Search results

Summary of Contents for AV Bridge 2x1

Reviews:

Related manuals for AV Bridge 2x1

Brands by name

Popular brands

VADDIO AV Bridge 2x1, Complete Manual

Search results

Summary of Contents for AV Bridge 2x1

Reviews:

Related manuals for AV Bridge 2x1

Brands by name

Popular brands