Quick-Connect USB Interface
Quick-Connect USB, Document Number 342-0653 Rev. B
Page 28 of 36
A
PPENDIX
1:
P
IN
-
OUTS FOR
EZ-P
OWER
V
IDEO
C
AMERAS AND
Q
UICK
-C
ONNECT
USB
Table: EZ-POWER VIDEO RJ-45 Connector Pin-outs
EZ-POWER VIDEO Port
Important Note:
The EZ-POWER VIDEO RJ-45 Connector on a Vaddio CAT-5 system camera is for
use with the Quick-Connect SR, Quick-Connect DVI/HDMI SR, Quick-Connect USB and USB Mini
Interfaces ONLY (568B Wiring Standard). The video signals are differential (HSDS) and can only be
processed by the interfaces above.
Table: Camera RS-232 Port
Pin #
Camera Pins
Quick-Connect USB
Pin - 1
N/A
Pin - 2
N/A
Pin - 3
N/A
Pin - 4
Not Used with QC-USB
Pin - 5
Not Used with QC-USB
Pin - 6
Digital GND
Pin - 7
RXD (from TXD of control source)
Pin - 8
TXD (to RXD of control source)
Table: Quick-Connect USB DE-15 Pin-Output (Analog Component YPbPr)
C
OMMUNICATION
S
PECIFICATION
Communication Speed: 9600 bps (default)
Start bit: 1
Stop bit: 1
Data bits: 8
Parity: None
No Flow control
Pin
Signal
1 Power+
2 Power-
3 Y+
4 PB+
5 PB
-
6 Y
-
7 PR+
8 PR-
Pin
YPbPr
1 Pr
2 Y
3 Pb
4 -
5 -
6 Pr
GND
7 Y
GND
8 Pb
GND
9 -
10 GND
11 -
12 -
13 -
14 -
15 -
NOTE:
The Vaddio Camera control protocol is similar to, but not
identical to the Sony® VISCA™ command set in order to be
compatible with several popular control devices. Not all VISCA
commands are supported and there are camera specific
commands in the Command and Inquiry Lists. These Command
lists are available in the individual camera manuals.
12345678
EZ-POWER VIDEO
RS-232
Cat-5 Cable:
Power to Camera,
Differential Video from Camera
12345678
