Configuring the Device with a Static IP Address
N
ETWORKING PAGE
If no DHCP server is available to automatically assign an IP address, the camera will use the default IP
address of 169.254.1.1. If this is the case, you may need to follow this procedure. If you also need to install
another camera or other device on this network, you
will
need to do this to prevent IP address conflicts.
Caution
Consult your IT department before changing network settings. Errors in network configuration can make
the camera inaccessible from the network. Do not change DHCP/Static addressing, IP address, subnet
mask, or gateway unless you are very familiar with the characteristics and configuration of the network
where you install the camera.
If the camera is currently at an IP address other than 169.254.1.1:
Work with your IT department to determine whether the device's current IP address is suitable.
If it is, set IP Address to Static. If not, follow the steps for a device at 169.254.1.1.
26
Complete Manual for the ConferenceSHOT AV Enterprise-Class Conferencing System
