VADA SUMP PUMP V150, Installation Manual

Page: 4 / 11

7 6
VADA SUMP PUMP V150 INSTALLATION MANUAL
APPLICATIONS
The Vada Sump Pump V150 is suitable for the following applications:
Ground water
transfer Rainwater
transfer Emptying
residential
sumps and
tanks Draining
of flooded
buildings
or cellars Removing
water from
drainage
collecting pits Transferring
wastewater
from kitchen
sinks, laundry,
or baths
to higher
sewage lines
The Vada Sump Pump V150 is not suitable for the following applications:
Pumping of
blackwater
(wastewater
with toilet
discharge) Pumping
liquids
containing
long fibrous
materials Pumping
aggressive or
inflammable
liquids Pumping
liquid
containing
solids larger
than maximum
recommended
particle size
(15mm) Pumping
liquid
containing
abrasive
solids (stones,
ceramics etc.)
What you’ll need to supply:
The residence must also have a Residual Current Device (RCD), also known as Electrical Leakage
Circuit Breaker (ELCB). This is a safety switch located in the Fuse Box.
Vada Sump Pump
V150
Discharge hose
(hard or flexible)
Stormwater pit
(may be required)
Teflon tape
Barrel union FI Access to a 10A
power point
Hose clamps
Nylon rope or
stainless-steel cable
(safe working load
of 10kg)
Valve socket to suit
pipework 32mm MI
(if you’re using a
hard discharge pipe) Poly tank outlet
(may be required)
Cable ties
Swing check valve
INSTALLATION
PREPARING FOR INSTALLATION
For a successful installation, ensure you have all pieces listed below.
What we’ve supplied:
x3 Hose barbs
(20mm, 25mm,
32mm)