RC SERIES
operation
Fig. 1-8
7. When load is at the designated spot, slowly lower the
load. Never release the vacuum when the load is off
the ground.
8. When in the correct position, press and hold the top
left and right buttons (Legacy) or top 2 circle shaped
buttons (Production) to release the load. There will be a
3 second delay and then the load will release.
9. Allow sufficient time for vacuum to release before
lifting the vacuum system off of the load.
SHUTDOWN AND STORAGE
When finished, the vacuum lifting system must be properly
shut down and stored.
1. If attached to excavator always store the lifter with
the pad on material. If detaching the lifter from the
excavator, store the lifter on the shipping cradle.
Never store the pad on the ground.
2. If storing on material, slightly tilt the lifter away from
the cab of the excavator. Sometimes the hydraulics can
bleed down and this will keep the lifter from falling off
the material.
3. Turn the engine key switch to the OFF position.
4. Press the OFF button on the wireless remote
transmitter.
5. Make sure doors are attached and in place.
