18
19
Seal is complete when “Fresh Sealed” LED light illuminates.
Turn the power off by pressing the green button on the top of your
FreshStation before uncovering the vacuum control port on wand, and
return the wand to your FreshStation.
Attach the green FreshPouch Seal over the black valve, pressing firmly to
ensure an airtight seal.
To Seal FreshPouches
Prepping Your FreshPouch:
Place desired contents into your FreshPouch. Be sure to leave the
area from the black port to the top of the FreshPouch empty.
Do not overfill, as this will affect ability to seal.
With clean hands, peel away clear adhesive at the top of your
FreshPouch. Check to be sure no food has adhered to the seal.
Sealing Your FreshPouch Using Your FreshStation:
Remove the wand from your FreshStation; fit the green vacuum
control port of the wand over the black valve on your FreshPouch.
To begin vacuum sealing, press the green button on top of your
FreshStation (“Ready/On” LED light illuminates) and cover the green
control port on top of the wand with your thumb or finger. Keep
this covered during the sealing process.
To open your FreshPouch:
Tear FreshPouch open at notches under the seal.
NOTE:
FreshPouches are designed for single use only!
Sealing Your FreshPouch Using Your FreshPump:
Fit bottom ring of FreshPump over black valve.
Holding the base of the FreshPump in one hand, use other hand to pull
handle up and push down, maintaining connection between pump ring
and black valve at all times.
HINT:
Pushing down on the base of the pump while sealing will ensure
the proper connection between the pump and valve.
Continue pulling and pushing until tension is felt in handle and air
depletion is noticeable inside the FreshPouch.
Attach green FreshPouch seal over the black valve, pressing firmly to
ensure an airtight seal.
1
2
1
2
1
2
1
2
4
3
5
1
2
3
4
2
1
5
3
4
5
5
4
3
4
With opening nearest you and FreshPouch (clear side) facing up,
grasp top corners with fingers and thumbs. Pull tight (hands
pulling outward) while folding date/contents label over until
white, dotted line shows. Press corners only.
Place fingers at center of folded seal. Press firmly toward corners.
Repeat several times, firmly pressing every part of seal.
PULL
PULL
FOLD OVER
3
