8
Vacuvita manual
www.vacuvita.com
www.vacuvita.com
Vacuvita manual
9
you regularly clean and thoroughly dry the adapter, especially after
using it on bags containing liquids.
Do not attempt to detach the tube from the adapter.
For full instructions, see chapter xx Need to know how to preserve
your food in the Vacuumbags? See Chapter xx
Plug and play // Containers
Quick check Containers
- Put the lid on the container.
- Place the vacuum adapter on the desig-
nated area (picture)
- Touch in the middle of the circular LED
rings and the Home Base will start remov-
ing air from the container via the vacuum
adapter. During the vacuum process, the
light rings blink to indicate that the vacuum is being created.
- Press the adapter firmly on the container for about 5 seconds.
- At first time use, or after replacing the seal in the lid, it might take
a little longer to create vacuum in the containers. Indication of
vacuum time of an empty container:
- 1L: +- 30 seconds
- 2L: +- 45 seconds
- 4L: +- 90 seconds
- The pump will automatically switch off after the vacuum level has
been reached. The circular LED rings however will remain switched
on to enable you to vacuum another container or bag.
- To release the vacuum from the container, gently pull the grey valve
on the top of the lid. You will hear the air release. When all vacuum
is released you can take the lid from the container.
Need to know how to preserve your food in the Containers?
See Chapter xx
For full instructions, see chapter xx for more functionalities Containers
Plug and play // Vacuumbags
- Remove all packaging and foils from the
vacuum hose and vacuum adapter. Some
parts of product packaging are eligible
for recycling. Keep packaging away from
small children.
- Connect the vacuum tube to the vacuum
adapter (picture)
- Simply plug the free end of the vacuum tube in the Home Base and
press– the circular indicator LED light rings will light up when the
vacuum tube is attached properly (picture)
Quick check Vacuum adapter:
- Place the adapter on the black top of
the Vacuvita Homebase and touch in the
middle of the circular LED rings and the
Home Base will start removing air via the
vacuum adapter. During the vacuum pro-
cess, the light rings blink to indicate that
the vacuum is being created.
- The pump will automatically switch off
after the vacuum level has been reached.
The circular LED rings however will remain switched on to enable
you to vacuum another container or bag:
- Make sure no liquids enter the vacuum tube: always check that the
vacuum adapter is dry before use (Warranty)
- Please note that the LED rings will switch off after 15 minutes.
Quick check Vacuumbags
- Close the bag with the ziplock
- Place the vacuum adapter on the desig-
nated area. (picture)
- Touch in the middle of the circular LED
rings and the Home Base will start
removing air from the vacuum bag via
the vacuum adapter. During the vacuum
process, the light rings blink to indicate
that the vacuum is being created.
- Press the adapter firmly on the bag dur-
ing the vacuum process.
- If the Homebase switches off while there
is still air in the bag, please retry, the adapter might have been
misaligned.
- If you don’t see any air removing from the bag, please be patient
it may take a while before the bag is wrapped. Otherwise check
again if your ziplock is closed properly and retry.
- The pump will automatically switch off after the vacuum level has
been reached. The circular LED rings however will remain switched
on to enable you to vacuum another container or bag.
- To release the vacuum from the bag, gently open the ziplock on the
top of the bag.
During the vacuum process small crumbs, food particles or drops of
liquid may be pulled into the vacuum system. It is recommended that
