Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. Manual-no.: 999084 / 05/10/2009
page 20 of 46
VACUULAN
V. 2.00
after 2 sec
Esc
Switch on
Menu structure of controller
Esc
Program menu
see section
”Working with the
controller”
”Program menus”
1013mbar
Start
↵
↵↵
↵↵
Start of program
within
2 sec
within
2 sec
Device menu
see next page
• Readjustment
• RS 232 parameters
• Sound
• Units of pressure
• Auto start
• Language
• Time delay (not for
VACUULAN
)
• Control (only with
RC 5/RC 6
)
• External error input
Function menu
Function
Cont.pum
Function
pControl
Esc
Esc
↵
↵↵
↵↵
Esc
only possible in ”vacuum control”
Function menu:
•
Setting of the basic function of the controller (only in ”vacuum control” (
pControl
)).
Device menu:
•
Setting of the device specific features and the periphery of the controller.
-
Readjustment: Adjusting the pressure transducer at atmospheric pressure and under vacuum, see
section ”Readjustment”.
-
RS 232 parameters: Setting of the interface parameters, see section ”Interface parameters”.
-
Sound: Switching on/off the function ”acoustic warning signal”.
-
Pressure unit: Selection of the pressure unit mbar, Torr or hPa.
-
Auto start: Process starts immediately after switching on the controller.
-
Language: Selection of the language in the menus (English, German, French).
-
Time delay: Delayed switching off of the cooling water and the pump (not for
VACUULAN
)
-
Control: Control of a valve or a pump via the IEC control line (only for
RC 5/RC 6
).
-
External error input: In case of failure of the signal the control sends an error message and switches off
the pump, if preset.
Attention: When operating a VARIO pump the external error input is used to indi-
cate a failure of the frequency converter and can not be wired externally.
Program menu:
•
Setting of the function specific parameters (e. g. preset pressure).
Attention: Depending on factory-set configurations some menu options are not active!
↵
↵↵
↵↵
Notes on menu structure of the controller
