Documents are only to be used and distributed completely and unchanged, especially including the section ”Safety information”. This is page 26 of a document consisting of
49 pages. The instructions for use describe only the actual product. If the product is older or newer than the date of writing, it is strictly the users´ responsibility to check carefully
the validity of the document (if in doubt, order appropriate instructions for use). 99 90 34 / 12/09/2003
To chose a pressure value for automatic switching off is
only possible if automatic switching off is activated (in
mode pressure control with automatic).
➨
Press key MODE simultanious with
▼
(arrow down).
☞
When the key is pressed shortly, the current pressure for
automatic switching off is displayed for one second (”AE”, i.
e. automatic switching off is preselected at the factory). With
a second tip within one second or continuous pressing:
➨
Select pressure for automatic switching off by using keys
▲
or
▼
(pressure selectable in a range from 1 to 1060 mbar
or ”AE”; ”AE”, i. e. automatic switching off is active if a pres-
sure value < 1mbar is selected).
☞
The pressure is stored as new pressure for automatic switch-
ing off when the key is released.
Automatic switching off
MODE
30
mbar
Changing to mode continuous pumping
➨
Press key MODE simultanious with
▲
(arrow up).
☞
Switching to continuous pumping is only possible, if pres-
sure control is not activated (after pressing key START/
STOP).
MODE
