5
LIGHT BULB CHANGING
Electric Brush:
BELT CHANGING AND AGITATOR CLEANING
Electric Brush Model:
Electric Shock or Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the
unit. Failure to do so could result in electrical shock or per-
sonal injury from cleaner suddenly starting.
1. Remove the electric brush cover as shown in BELT
CHANGING & AGITATOR CLEANING section.
2. Push in and turn bulb counterclockwise, then pull
out to remove.
3. Push in and turn the bulb clockwise to replace. Bulb
must not be higher than 130 volts/15 watts.
Note:
replacement bulb number is EB26028.
4. Reinstall the electric brush cover as shown in BELT
CHANGING & AGITATOR CLEANING section
Disconnect hose and brush from electrical outlet.
Frequently check and
remove hair, string and lint buildup in brush area. If buildup becomes excessive,
disconnect the brush from wand and follow steps below.
To Remove Belt:
1. Turn the electric brush upside down.
2. Unscrew the brush cover screws.
3. Turn brush over right side up. Press handle
release pedal and lower the swivel. To remove
cover, grasp the sides and pull out to release the
outside cover.
!
WARNING
Always follow all
safety precautions
when cleaning and
servicing the electric
brush.
ELECTRIC BRUSH CARE
Summary of Contents for EK12
Page 1: ...EK12 EK12C EK1235 EK1235C Deluxe Electric Kit...
Page 9: ...EB250 ELECTRIC BRUSH...
Page 10: ...9...
