Vacon NXP, Manual

Page: 21 / 54

Parameter lists vacon • 21
24-hour s358 (0)40 837 1150 • Email: vacon@vacon.com
3.13 Keypad control (Control keypad: Menu M3)
The parameters for the selection of control place and direction on the keypad are listed below. See the
Keypad control menu in the product's User's Manual.
Code Parameter Min Max Unit Default Cust ID Note
P3.1 Control place 1 3 1 125
1=I/O terminal
2=Keypad
3=Fieldbus
R3.2 Keypad reference Par. 2.1.1 Par. 2.1.2 Hz
P3.3
Direction (on
keypad)
0 1 0 123 0=Forward
1=Reverse
R3.6 Stop button 0 1 1 114
0=Limited function of
Stop button
1=Stop button always
enabled
R3.4 PID reference Par. 2.10.6 Par. 2.10.7 °C 25,00
R3.5 PID reference 2 Par. 2.10.6 Par. 2.10.7 °C 0,00
Table 29. Keypad control parameters, M3
3.14 System menu (Control keypad: M6)
For parameters and functions related to the general use of the frequency converter, such as application
and language selection, customised parameter sets or information about the hardware and software, see
the product's User's manual.
3.15 Expander boards (Control keypad: Menu M7)
The M7 menu shows the expander and option boards attached to the control board and board-related
information. For more information, see the product's User's Manual.