Vacon NXI FI9 series, User Manual

Page: 93 / 113

control keypad vacon 93
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
7
This function allows the user to prohibit changes to the parameters.
If the parameter lock is activated, the text
*locked*
will appear on the display if you try to edit a
parameter value.
NOTE: This function does not prevent unauthorised editing of parameter values.
Enter the edit mode by pressing
Menu button right .
Use the
Browser buttons
to change the
parameter lock status. Confirm the change with the
enter
button or go back to the previous level by
pressing
Menu button left .
Figure 7-15. Parameter locking
Start-up wizard (P6.5.3)
The Start-up wizard facilitates the commissioning of the inverter. If active, the Start-up wizard
prompts the operator for the language and application of his/her choice and then displays the first
menu or page.
Activating the Start-up wizard: In the System Menu, find page P6.5.3. Press
Menu button right
once
to enter the edit mode. Use the Browser buttons to select Yes and confirm the selection with the
enter
button. If you want to deactivate the function, follow the same procedure and give the
parameter value No .
Figure 7
-
16. Activation of Start-up wizard
S1
è
S9
READY
I/O term
READY
I/O term
READY
I/O term
enter
READY
I/O term
READY
I/O term
P1
è
P4
System Menu
Security
Parameter Lock
ChangeEnable
Parameter Lock
ChangeDisabl
Parameter Lock
ChangeEnable
READY
I/Oterm
READY
I/Oterm
READY
I/O term
enter
Startup wizard Startup wizard
No No
Startup wizard
Yes
CANCEL
CONFIRM