Vacon NXI FI9 series, User Manual

Page: 67 / 113

control keypad vacon 67
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
7
7.2 Keypad push-buttons
The VACON
®
alphanumeric control keypad has 9 push-buttons that are used for controlling the
inverter (and motor), setting parameters, and monitoring values.
Figure 7-2. Keypad push-buttons
7.2.1 Button descriptions
reset
= This button is used to reset active faults (see Chapter 7.3.3.4).
select
= This button is used to switch between the two latest displays. This may be
useful when you want to see how the changed new value influences some
other value.
enter = The enter button is used for:
1) confirmation of selections
= Browser button up
Browse the main menu and the pages of different submenus.
Edit values.
= Browser button down
Browse the main menu and the pages of different submenus.
Edit values.
= Menu button left
Move backward in menu.
Move cursor left ( in parameter menu ).
Exit edit mode.
Press for 2 to 3 seconds to return to main menu.