Vacon 7-segment Control Panel, Manual

Page: 8 / 12

Vacon Plc Phone: +358-(0)201 2121 Fax: +358-(0)201 212 205
Service: +358-(0)40-8371 150 E-mail: vacon@vacon.com
Vacon Page 7 (10)
7-segment Control panel
6. Programmable push-button page
The BTNS indicator is lit when the
programmable push button page is active. The
function of the enter button can be selected on
this page. The selected function is valid only
on this page and on other pages the enter
button has it’s original function. The feedback
information tells the state of the button
function. When the button is pressed, the
feedback information is shown small.
Figure 9. Programmable push button page.
RUN READY FAULT
MON PAR REF BTNS
RUN READY FAULT
MON PAR REF BTNS
Push down
Release
The feedback information
is shown small when the
button is pushed
The feedback information
changes its state as soon
as "push down" has been
recognized
The feedback information
is shown big when
the button is released
Feedback
information
MON PAR REF BTNS
RUN READY FAULT
MON PAR REF BTNS
RUN READY FAULT
MON PAR REF BTNS
RUN READY FAULT
Button-page
Button no.
Button Button Function Feedback information
number name 0 1 Note
b 1 Reverse Changes the direction Direction Direction
Feedback information
of rotation of the motor . command command
flashes as long as
Active only if the panel is forward reverse
direction is different
the active control source
from the command
b 2 Active Selects the active control Control via Control from the
control source between the I/O terminals Control Panel
source panel and I/O terminals
b 3 Clear trip When pressed clears No clearing Clearing accepted
operating the trip operating hour
hour counter
counter
b 4 Clear trip When pressed clears No clearing Clearing accepted
MWh the MWh trip counter
counter
Table 2. Programmable push-buttons.