Page 6 (10)
Vacon
Vacon Plc
Phone: +358-(0)201 2121
Fax:
+358-(0)201 212 205
Service: +358-(0)40-8371 150
E-mail: [email protected]
7-segment Control panel
necessary parameters for the basic use of the
device and System parameter Group 0. Group
0 becomes visible only when the Application
package lock is opened. See Vacon CX/CXL/
CXS User's Manual Chapter 11.
Other applications have more parameter
groups. Parameters of the groups follow each
other and changing from the last parameter of
one group to the first parameter of the next
group or vice versa is done simply by pushing
arrow up/arrow down buttons. Alternatively,
pressing selects the next group.
Figure 7. Parameter page.
5.
Reference page
The reference page is active when the REF
indicator is lit.
If the Control panel is the active control source,
the frequency reference can be changed by
changing the value on the display with arrow
up/arrow down push-buttons, see Figure 8.
PG
MON PAR REF BTNS
RUN READY FAULT
MON PAR REF BTNS
RUN READY FAULT
MON PAR REF BTNS
RUN READY FAULT
Increment value
Decrement value
Confirm value
Next page
Parameter value
Parameter
page
Parameter
group
Parameter
number
The reference change is valid immediately. The
motor speed changes as fast as the reference
is changing or the load inertia allows the motor
to accelerate/decelerate.
The active control source can be selected with
programmable button 2, see Chapter 6.
Increment
reference value
Decrement
reference value
Next page
PG
MON PAR REF BTNS
RUN READY FAULT
PG
MON PAR REF BTNS
RUN READY FAULT
MON PAR REF BTNS
RUN READY FAULT
Reference value
Reference
page
Figure 8. Control panel reference value setting.
4.
Parameter page
The PAR indicator is lit when the Parameter
page is active. Figure 7. shows how the
parameter values can be changed.
The enter button confirms the change of
the parameter value. When the new value is
confirmed the PAR indicator blinks once.
If the enter button is not pressed the parameter
value will not be changed.
In the Basic application (default setting) there
is only parameter Group 1 which has all
