21
5.
Using the + and/or – buttons, select the day for which you want to remove a specific
timer setting.
6.
Press the EDIT button.
7.
Using the + and/or – buttons, select the number of the timer setting that you want to
remove.
8.
Pressing the C (Cancel) button will erase the timer setting concerned.
CHECKING THE TIMER SETTINGS USING THE REMOTE CONTROL
Press the WEEK button a few times briefly. You will see the following settings in sequence:
1.
Timer ON
or
Timer OFF
2.
Once only (01) or endlessly (99)
3.
U1-U7, day of the week
4.
Timer setting number of the day concerned (1, 2, 3 or 4)
5.
The set temperature of the thermostat
6.
Start time in hours
7.
Stop time in hours
This is repeated for the next timer settings.
All 28 timer settings are shown, also the timer settings that have not been filled. The
temperature of the non-filled timer settings is 20 °C.
OPEN-WINDOW DETECTION SYSTEM (NOT APPLICABLE FOR WIFI
CONTROL)
Press the
button on the remote control. The
symbol will appear on the heater’s
display.
If the ambient temperature decreases 8 °C or more within 15 minutes, the heater will turn off
and the related symbol will flash.
If this is the case and you press this button again, the heater will resume its normal
operation.