18
Attention: If the infrared panel is switched OFF using the main switch
or
by removing the
plug from the socket, the day will be set to 1 and the time to 00.00 the next time
you switch the heater ON again.
However, the timer data that were entered previously (ON and OFF times of the
week timer) are stored. To avoid misunderstandings, the week timer is
automatically set to OFF in case of turning the heater off using the main switch
or removing the plug from the socket. Otherwise, the panel would switch on
and off at the wrong times.
Switching the week times on again is described below.
Please note that the abovementioned does not apply when using the APP. The
APP updates the time automatically and therefore, you do not have to enter the
time manually.
Attention: If in the time setting mode no button is pressed for five (5) seconds, the timer-
setting mode will stop and you will have to start all over again.
Attention: All timer settings – maximum 28 settings: seven (7) days multiplied by
maximum four (4) settings per day – are processed consecutively. herefore,
make sure that they do NOT contain contradictions.
Step
Press button:
The display shows:
Explanation:
1
WEEK (3 sec.)
UU flashes
2 SET
ON/OFF
flashes
3
+ or –
Select:
+ = ON: Timer on (on the set times, the
heater will automatically switch on/off)
– = OFF: Timer off (on the set times, the
heater will not automatically switch
on/off)
4 OK
UU
5
SET
01 or 99 flashes
Select:
+ = 01: All timer settings are executed
only once
– = 99: All timer settings are executed
endlessly [see
Attention (1)
].
6 OK
UU
7 SET
U1
flashes