15
2.
Using the + and – buttons, the set temperature can be adjusted from 0 °C to 37 °C). If
the set temperature is higher than the ambient temperature, the heater will start to
heat and the heating symbol will appear.
When the set temperature is reached, the heater will automatically switch OFF and will
switch ON again when the room cools down.
The heating symbol will disappear and re-appear accordingly.
If no button is pressed during two (2) minutes, the ambient temperature will disappear from
the display. Pressing any button will make the ambient temperature re-appear.
SETTING THE TIME AND DAY ON THE HEATER USING THE CONTROL
PANEL
Using the M button, the time and day of the week can be entered so that you can use the
timer function.
The heating panel should be ON, but should
NOT
heat and therefore, there is no heating
symbol visible on the display. (Do this by setting the temperature lower than the ambient
temperature, for example.)
Step
Press button:
The display shows:
Explanation:
1 M
HH
flashes
2
+ or –
1 to 7
Select day of the: 1 = Monday,
2 = Tuesday, etc.
3 M
H1
flashes
4
+ or –
1 to 24
Select the correct hour
5 M
H2
flashes
6
+ or –
1 to 60
Select the correct minute
7 M
Ambient
temperature
8
Day and time are set.
CHECKING THE DAY/TIME DATA ON THE HEATER USING THE CONTROL
PANEL
The heating panel should be ON and should heat. Therefore, the heating symbol is visible on
the heater’s display. (Do this by setting the temperature higher than the ambient
temperature, for example.)