www.VacMasterFresh.com • 800-821-7849
7
HOW TO
Set Up - Starting the VP215
1. Attach the power cord and plug the machine into a
grounded electrical outlet
- Properly insert the electrical cord
into the power outlet on the back of the machine and then plug
the cord into the wall outlet.
2. Open the machine lid
- Release the lid lock, located on the
right side of the machine, and allow the lid to lift and remain
open.
3. Turn the power switch on
- Turn
the red switch on the left side of the
machine toward the front, switching
from the “0” to the “1” position. The
LED Screen on the control panel will
illuminate showing a symbol.
Set Up - Adjusting the VP215 Timing Controls
Note: All timing adjustments must be made with the lid lock off and the lid open.
To adjust/set the timing controls, press the SET button on the
control panel until the required label (Vacuum, Sealing or Cooling) is
illuminated. For each selection, the current time setting will show on
the LED Screen. All time settings are displayed in seconds.
For initial testing, the time settings should be:
Vacuum Time - 40 seconds
Sealing Time - 1.2 seconds
Cooling Time - 2 seconds
To change the settings, please read the instructions for each control
on Page 8.
IMPORTANT:
Do not turn the machine on until the lid lock has
been released. The lid lock feature is used ONLY to keep the lid
closed while the machine is in storage.
