8
GENERAL ASSEMBLY INSTRUCTIONS
9HULI\WKDWWKHSRZHUFRUGLVGLVFRQQHFWHGIURPWKHRXWOHW)LJ
8QGRWKHODWFKHV)LJ
/LIWWKHSRZHUKHDGRIIWKHFROOHFWLRQWDQN)LJ
4. Remove the contents from inside the collection tank. Make sure you have all contents as listed
RQSDJH)LJ
5. Turn the collection tank on its side and insert the four caster feet into the slots on the collection
tank and tighten with supplied screws. Verify that the caster feet are mounted correctly. Do not
RYHUWLJKWHQVFUHZV)LJ
6. Position the hose storage rack as illustrated. Fully insert one end of the hose storage rack into
the slot illustrated by the arrow, then pull the other end of the hose storage rack to align with
WKHFRUUHVSRQGLQJDUURZDQGLQVHUWLQWRWKHVORWXQWLOLWLVVHFXUHGLQSODFH)LJDG
<RXUYDFXXPFRPHVUHDG\IRUGU\YDFXXPFOHDQLQJ,IWKHFDUWULGJH¿OWHULVQRWLQVWDOOHGUHIHU
WRSDJHIRULQVWDOODWLRQLQVWUXFWLRQV)LJ
2SWLRQDO)RULPSURYHGGXVW¿OWHULQJ¿WWKHGXVWFROOHFWLRQEDJÀDQJHRQWRWKHLQOHWSRUWWDNLQJ
FDUHQRWWRGDPDJHWKHEDJ)RULQVWDOODWLRQLQVWUXFWLRQVVHHSDJH)LJ
NOTE:
The dust collection bag is for dry pick-up only.
)RUZHWYDFXXPFOHDQLQJUHPRYHWKHFDUWULGJH¿OWHUDQGLQVWDOOWKHVXSSOLHGIRDPZHW¿OWHU
6HHSDJHIRUWKHIRDPZHW¿OWHULQVWDOODWLRQLQVWUXFWLRQV)LJ
10. Place the powerhead back on the collection tank and secure into place using the latches
)LJ
A Phillips head screwdriver is required.
1
10
3
8
9
2
5
4
7
6d
6a
6b
6c
12
13
14
15
11
16
UNPACKING YOUR WET/DRY VACUUM & GENERAL ASSEMBLY
WARNING:
DO NOT PLUG THE POWER CORD INTO A POWER OUTLET. MAKE
SURE THE PLUG IS DISCONNECTED BEFORE ASSEMBLING THE WET/DRY VACUUM.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE TO RAIN.