11
MAINTENANCE
1. Verify that the power cord is disconnected from the outlet (fig.1).
2. Disconnect the hose from the vacuum (fig.2).
3. Undo the latches and remove the power head from the collection tank (fig. 3).
4. Clear all dirt or debris from the collection tank and hose (fig.4).
5. Clean or replace the filters (fig.5).
6. Check the hose, attachments, and power cord to verify that they have not been damaged.
IMPORTANT!
Clean or change the filter regularly for best performance.
ALWAYS USE DUST
FILTER FOR DRY VACUUMING.
If the machine is used without the cartridge filter, the motor will
burn out and the warranty will be voided. Always keep spare dust filters on hand.
NOTICE!
The filter included is made of high quality material designed to stop small dust particles.
The filter should be used for dry pick-up only. A dry filter is necessary to pick up dust. If the
dust filter is wet, it will clog quickly and be very difficult to clean. Handle the filter carefully when
removing it for cleaning and replacing it. Check the filters for tears or small holes, a small hole
can let dust pass through and out of the filter. Do not use a filter with holes or tears; replace it
immediately.
WARNING:
ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET
BEFORE REMOVING THE POWER HEAD FROM COLLECTION TANK.
INSTALLING & CLEANING REUSABLE
CLOTH FILTER
INSTALLING REUSABLE CLOTH FILTER
1. Verify that the power cord is disconnected from the outlet (fig.1).
2. Remove power head and place in upside down position.
Summary of Contents for VHB305M
Page 14: ...14 EXPLODED VIEW ...
