background image

Quick Operation Guide

Robit V7S Pro
Robot Vacuum Cleaner 

Attention Before Use

Please neatly arrange desks, chairs and household appliances to prevent the robot 

getting stuck during cleaning.

Please do not stand in such narrow areas as doorways and aisles in case the robot 

fails to clean these areas.

The messy power cords, toys and other objects on the floor may entangle the robot, 

please kindly organize them.

Remove the white protective strip and the transparent protective film on the infrared 

front bumper before using. Otherwise, the robot may not work properly.

Charging the Robot

Preparation before charging

Before installing the charging base, remove the protective film on the charging

Base, and wipe the installation ground till clean.

1

English

Summary of Contents for V7S Pro

Page 1: ...ails to clean these areas The messy power cords toys and other objects on the floor may entangle the robot please kindly organize them Remove the white protective strip and the transparent protective film on the infrared front bumper before using Otherwise the robot may not work properly Charging the Robot Preparation before charging Before installing the charging base remove the protective film o...

Page 2: ...ing base is plugged in and the robot in standby state press the recharge button on the remote control or press the start stop button of the robot for 3 5 seconds the robot will return to charge automatically Charging mode Turn on the side power switch on the robot 1 for power on 0 for power off The green light turns on the robot is activate When the orange light is breathing the robot is charging ...

Page 3: ... please do not move the robot at will The robot will stop for a short time in the process of working calculating and planning the areas that need to be made up for cleaning or the path planning Please wait patiently and the time of pauses depends on the complexity of the indoor environment Turn on Turn off When the robot is working press the start stop button or button on remote control and then t...

Page 4: ...urn the power switch in the side of the robot to 0 The indicator goes off and robot is power off This guide is not a substitute for instructions Please refer to instructions if you need to learn further details and guidelines 4 ...

Reviews: