11
BLOWER OPERATION
This Wet/Dry Vacuum has blowing capabilities. To use the blower feature follow the instructions
listed.
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Make sure the collection tank is empty before using as a blower. Clear all dirt and debris from
the hose and collection tank.
3. Remove hose from the vacuum port.
4. Secure the locking end of the hose onto the blower port on the back of the power head (Fig. 2).
5. Fit the desired attachment onto the hose or extension wand (Fig. 3).
6. Verify that the on/off switch is in the ‘O’ OFF position before plugging the power cord into the
outlet (Fig. 4 & 5).
%HIRUHWXUQLQJ21WKHYDFXXP¿UPO\KROGWKHORRVHHQGRIWKHKRVH7XUQWKHPRWRURQE\
ÀLSSLQJWKHVZLWFKWRWKHµ,¶21SRVLWLRQ)LJ
2QFH\RXKDYHFRPSOHWHGEORZLQJÀLSWKHRQRIIVZLWFKWRWKH22))SRVLWLRQDQGXQSOXJWKH
power cord from the outlet (Fig. 7).
WARNING:
ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1
(OR IN CANADA, CSAZ94.3) BEFORE USING BLOWER.
WARNING:
WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT
BE INHALED.
CAUTION:
KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS.
6
4
2
1
7
5
3
Summary of Contents for VBVB611PF 1101
Page 17: ...17 EXPLODED VIEW...