Vacmaster CDM0610P, Original Instructions Manual

Page: 12 / 20

12
GB
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK-UNPLUG BEFORE
TROUBLESHOOTING.
Cleaning Performance
Vacmaster vacuum cleaners are tested for endurance. If your motor is operating, then the most
likely cause for a loss in suction is a blockage or an opening in the vacuum.
To maintain a high cleaning performance from your machine, it is important to replace or clean
pre-filters as necessary. Replace full dust bags to prevent performance drops. A performance drop
with clean filters can only be caused by a blockage in the tools or the hose.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
The appliance does not work.
No power.
Check the power supply and
fuse.
Functional fault in the power
cord, switch, or motor.
Have the damaged part
checked by qualified personnel
or contact the after sales
helpline.
Dust is escaping from the motor
cover.
The pre-filter is missing or
damaged.
Ensure the pre-filter is correctly
installed or replace if damaged.
The air inlet filter is missing or
damaged.
Ensure the air inlet filter is
correctly installed or replace if
damaged.
Low suction power and high
operating noise / vibrations.
Dust bag is full. Replace the dust bag.
Suction nozzle, hose, or tank
inlet is blocked. Check the suction nozzle, hose,
and tank inlet for obstructions.
The pre-filter or air inlet filter
needs to be cleaned.
Check and clean the pre-filter
and air inlet filter. Replace if
damaged.