V7 NAV740, User Manual

Page: 47 / 86

4.7.2 Controlled traffic direction
The different cameras can measure the speed of one direction of the traffic, both
directions, or even several directions in an intersection, when they are mounted on a
rotating base. V7 Navigation warns you only if you drive in a measured or possibly
measured direction.
The measured direction of the cameras is displayed with the following symbols:
4.7.3 Speed limit checked
As additional information, the speed limit checked by the camera is given for fixed,
built-in and section control cameras. When you manually save a camera location
from the Cursor menu (Page 31), the speed limit of the road (if available) is used by
default, but you can change this value with the given control:
4.7.4 Add a new camera or edit an existing one
You can add new cameras, modify the parameters of existing ones, or delete them.
Select a point on the map, then use the POI button in the Cursor menu (Page 31).
This will open the list of POIs around the selected map point. To add a new camera,
use the Add Cam button, and set its parameters. To edit an existing camera, find it at
the end of the POI list, and tap it. A new screen will open with its details. Tap Delete
on this screen if you wish to cancel the camera.
4.7.5 Change the settings of the camera warning
You can turn on and off the camera warning, and fine-tune its settings in General
settings (Page 50).
47