ENGLISH
- 22 -
1.1 - TECHNICAL ASSISTANCE SERVICE
For any installation problem please contact our Customer Service
at the 39-0172.812411 operating Monday to Friday
from 8:30 to 12:30 and from 14:00 to 18:00.
1.2 - EU DECLARATION OF
CONFORMITY AND DECLARATION
OF INCORPORATION OF PARTLY
COMPLETED MACHINE
Declaration in accordance with Directives: 2014/35/UE (LVD);
2014/30/UE (EMC); 2006/42/CE (MD) ANNEX II, PART B
The manufacturer V2 S.p.A., headquarters in Corso Principi di
Piemonte 65, 12035, Racconigi (CN), Italy
Under its sole responsibility hereby declares that:
the partly completed machinery model(s):
SLAID140 - SLAID160
Description: Electro-mechanical actuator for sliding doors
• built for incorporation in a machine pursuant to Directive
2006/42/EC
• compliant with the essential safety requirements indicated in
Annex 1 of the Directive, with the exclusion of points: 1.2.4.3,
1.2.4.4, 1.3.4, 1.3.5, 1.3.7, 1.3.8.2, 1.4, 1.5.3, 1.5.7, 1.5.14,
1.5.15, 1.5.16
• complies with the requirements of the following EC Directives:
2014/30/EU Electromagnetic Compatibility
• 2014/35/EU Low Voltage
• and the following standards (parts/clauses of) were applied:
• EN 60335-1, EN 61000-6-2, EN 50366, EN 61000-6-3,
EN16005
and also declares that:
• the relevant technical documentation was compiled in
compliance with part B of Annex VII; this documentation, or
parts of it, were sent by post or electronical
• the product cannot be placed in service until the machine in
which it will be incorporated or become a component of is
identified and declared compliant with the conditions of the
Directive 2006/42/EC and the national legislation in force,
meaning until the machinery for which the declaration is
released forms a single assembly with the machine.
The relevant technical documentation is available at the national
authorities’ request after justifiable request to:
V2 S.p.A.
Corso Principi di Piemonte 65, 12035, Racconigi (CN), Italy
The person empowered to draw up the declaration and to provide
the technical documentation:
Giuseppe Pezzetto
Legal representative of V2 S.p.A.
Racconigi, il 01/06/2015
1.3 - MACHINERY DIRECTIVE
The installation technician that automates a door pursuant to
Directive 2006/42/EC becomes the manufacturer of the automatic
door machine and must:
• Prepare the Technical File with the documents indicated in
Annex VII of the Machinery Directive and archive it for at least
10 years.
• Draft the CE Declaration of Conformity according to Annex II-A
of the Machinery Directive and send a copy of it to the user.
• Affix the CE marking on the automated door pursuant to point
1.7.3 of Annex I of the Machinery Directive.
• In particular, but not exclusively, if for the purposes of standard
EN 16005 installation is necessary of a monitored sensor or
sensors, connection and setting must be installed as indicated
in this manual (see page 12) and correct functionality checked
as per the instructions in the manual of the sensor/s used.
