V2 CITY2+L, Manual, Page: 40 / 100

ENGLISH
- 38 -
11 - CONTROL UNIT CONFIGURATION
Control unit time and function programming is made within a
special configuration menu, to which you can access and where
you can shift through DOWN, MENU and UP keys placed under
the display.
Hold down the MENU key until
-PrG
appears on display, to
activate the programming mode while display views the panel.
The configuration menu consists in a list of configurable items;
the display shows the selected item.
• By pressing DOWN, you will pass to the next item
• By pressing UP, you will return to the previous item
• By pressing MENU, you can view the current value of selected
item and possibly change it.
The last menu item (
FinE
) allows storing the carried out changes
and going back to the control unit normal operation.
You must exit from programming mode through this menu item if
you do not want to lose your configuration.
m
WARNING: in case no operation is carried out for
more than one minute, the control unit exits from the
programming mode without saving any of your setups and
changes, which will get lost.
NOTE: By holding down the UP or DOWN keys, configuration
menu items will scroll fast, until item
FinE
is viewed. In this way,
you can quickly reach either the top or bottom of the list.
F1
L N
L
N
F1
MAINS
MAINS
CITY2+
CITY2+L
CITY2+
CITY2+L
CITY2+BC
OVERLOAD
DOWN MENU UP
BAT- POW+
POW-
BA
T+
RECEIVER