ENGLISH
26
Loading of default values:
The value of all the items can be set to a standard value (see table at
the end) with only one control.
Select the item
Si
to load the default values.
After loading the default values, it is possible to scroll down the other
items on the menu and change each parameter; exiting the default
menu, the first following item is automatically selected.
Light on at rest on the outer side
Through this menu it is possible to set the state of the lights when no
phases are active, neither incoming nor outgoing.
SPEn
outer lights off
vErd
green light on fixed
roSS
red light on fixed
Light on at rest on the inner side
Through this menu it is possible to set the state of the lights when no
phases are active, neither incoming nor outgoing.
SPEn
outer lights off
vErd
green light on fixed
roSS
red light on fixed
Automatic starting up on the outer side
By this menu it is possible to set the starting up mode of the incoming
phase through signal on terminal M1:
no
the phase is started up if a control arrives on the terminal M1
while the sensor of presence is active
Si
the phase is started up when the sensor indicates the
presence of a vehicle
