Maximum ambient temperature : 40° C
Maximum housing temperature : 80° C
Minimum distances
.
.
Min. distance from flammable surfaces: 1 m
Min. distance to lighted object: 2 m
Total heat dissipation
1330 BTU/h (calculated)
Weight (net):
.
.
.kg.
Dimensions (mm)
Accessories
- Omega holder (No.99010420)................................2 pcs
- Gobo-set 16
.
(No.15050025)...................................1 pcs
Optional Accessories
- Flash cable RS232/DMX (No.13050624)
11. Maintenance and cleaning
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not build
up on or within the fixture. Otherwise, the fixture‘s light-output will be significantly reduced. Regular cleaning will
not only ensure the maximum light-output, but will also allow the fixture to function reliably throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no circumstances
should alcohol or solvents be used!
DANGER !
Disconnect from the mains before starting any
maintenance work
The front objective lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing
the light-output very quickly. The cooling-fans should be cleaned monthly.
The interior of the fixture should be cleaned at least annually using a vacuum-cleaner or an air-jet.
Dichroic colour filters, CMY lamellas, gobo wheels and the internal lenses should be cleaned monthly.
Remove dust and dirt from the fans and cooling vents using a soft brush and vacuum-cleaner.
Important! Check the air filters periodically and clean before they become
clogged!
Clean the air filters placed in the fixture´s covers. Use a vacuum cleaner, compressed air or you can wash
them and put back dry.
After replacing the air filters, reset the elapsed time counter in the menu "Information" (Information--->Air Fil
-
ters---> Elapsed Time).
Specifications are subject to change without notice.
January 12, 2011
Summary of Contents for Robin 300 plasma spot
Page 1: ...Version1 6...
