background image

Installation instructions

Room air laundry dryer
One-family household

1064364-07

04/10/2022

1064364-07

9

Tumble dryer positioned next to washing machine: GEBERIT concealed drain trap

Cannot be connected to a concealed double drain trap! There must be a separate concealed drain trap for each appli-
ance.

The drain hose must be fastened with the hose clip supplied.

For the washing machine, use concealed drain trap GEBERIT UP 

1

(GEBERIT art. no. 152.236.00.1).

For the tumble dryer, use concealed drain trap GEBERIT UP 

2

 (GE-

BERIT art. no. 152.237.00.1).

1

2

2

Washer-dryer towers

Can be connected to a concealed double drain trap.

Use an open-top fixed upright outflow pipe with the drain trap.

Route drainage pipe separately or use condensate drain kit 

W55969

.

≤700

W55969

≤70

0

Positioning and levelling the appliance

To ensure fault-free operation, the appliance must stand level with all 4 feet firmly on the installation plate and not
wobble.

Roughly adjust the height of the front and rear adjuster feet.

Use a spirit level 

1

 to level the appliance.

Slide the appliance onto the installation plate.

Finely adjust the front adjuster feet.

The appliance must not wobble!

1

The condensed water hose and connection cable must not be crushed between the rear of the appliance and the wall
or kinked during installation.

Summary of Contents for V4000 DualDry











Reviews: