Installation instructions
Induction hob
GK46TIG | GK46TIM | GK47TIMAS
1021071-R01
28/11/2016
4
General information about installation
▪
The worktop must be flat so that it is sufficiently sealed against the ingress of liquids.
▪
In order to guarantee good ventilation, a space of at least 10 mm in height is necessary beneath the appliance.
Overlying installation with normal mounting frame
The cooking ring layout of the hob to be fitted can differ from the hob illustrated.
GK46TIGC, GK46TIMGC, GK46TIMSC/O
H
584
514
Y
Y
490±1
560±1
≥50
≥5
0
A
600/550
≥57
**
Ri
Ra
GK46TIMASC, GK47TIMASC
51
4
H
774
Y
Y
490
±1
≥5
0
≥50
750±1
600/550
A
1
Ri
Ra
GK46TIMXSC
514
H
704
Y
Y
Ri
490±1
≥50
≥5
0
A
680±1
600/55
0
=
=
=
=
1
Ra
≥10
*
B
Y – Y
Drawer/cabinet
Cable length 1.7 m
Cable length 1.7 m
Cable length 1.7 m
* The clearance space must be maintained.
** Cut-out for a niche width of 550 mm
1
With symmetrical installation, cut-outs in the side panels are not required.
Type
A – loosely based on
manufacturer
B
H
Corner radius Ra/Ri
GK46TIMGC, GK46TIMSC/O,
GK46TIMXSC, GK46TIMASC,
GK47TIMASC, GK46TIGC
≥30 mm
≥60 mm
50 mm
10/8 mm
A
Worktop depth (in combination with directly built-under oven)
B
Required clearance in the service exchange
H
Measurement from the top side of the worktop to the underside of the hob (ventilation opening)
Ri
Appliance corner radii
Ra
External corner radii of the cut-out
Installation
1.
Create the mounting cut-out accurately.
2.
Carefully place the appliance in the mounting cut-out and push against the work surface until flat.
