Installation instructions
Induction hob
GK46TIG | GK46TIM | GK47TIMAS
1021071-R01
28/11/2016
8
Variable areas of the special cut-out dimensions
GK46TIMSU/O
560–585
490–530
=
=
(30)
6 adjusting braces
Aim for
≤R10
Reinforcement of the cut-outs with a
complete chrome-nickel steel cover
Arrangement of the adjusting braces
≤25
≤32
E
D
40
30
(≤ screw length)
(≤ screw length)
Warning, glass breakage:
Do not overtighten screws
Reinforcing slats:
≥25 × 25 mm
Plate for chrome-nickel steel cover
The installation instructions with regard to electrical and safety-related issues remain fully valid for this installation.
1.
Make a precise, right-angled cut-out in the work surface (if not already present). Aim to keep the cut-out dimensions to a min-
imum.
2.
Securely clamp the appliance in the cut-out using the enclosed adjusting braces
D
and screws
E
. If necessary, install reinfor-
cing slats and use these to make the cover flat.
