Electric interface for comfort ventilation appliances from Zehnder Comfosystems
Cable colour
12 V
GND
CH
Tch
1
2
3
4
1
blue
2
yellow
3
red
4
black/white
The electric interface at the side of the comfort ventilation appliance must be declared safety extra-low voltage (SELV) in
accordance with IEC 60335-1 3.4.2.
Dimensions
The positioning of the Zehnder insert box Z in the ceiling must be planned and coordinated in relation to the hob.
Max. positional deviation: ±1 cm (in all directions)
280
280
750
485
1200
100
ø 160
B
A
*
Z
* Grid spacing: 10 mm
Telescopic casing
(available in various heights)
Height A: see planning documents for kitchen appliances
Distance above hob
Minimum height B:
For electric hob:
For gas hob:
min. 600 mm
min. 750 mm
Installation
Note
•
Planning features for non-destructive de-installation and maintenance of the appliance.
– Do not route telescopic casing in suspended ceilings.
– Avoid silicon joints between the telescopic casing and the appliance.
– All plastering, plasterboarding, wall papering or painting work is to be carried out prior to installing the appliance.
•
This appliance is to be fastened directly under the Zehnder insert box, which must be precisely attached to the ceiling beforehand.
The supply air connection from the Zehnder insert box must be freely accessible. Always follow the manufacturer’s installation
instructions and safety precautions.
Installation instructions
J016.113-2
Range hood DI-SMC12
12.12.12
Island hood
Operating mode: extracted air with comfort ventilation system
2