3 Operating the appliance
3
Operating the appliance
3.1
Using for the first time
Appliance configuration
The model can be used to extract or recirculate air. The appliance is set up ex-factory for
use in the extraction mode.
If the appliance is to be operated as an extraction model, the saturation indicator
for the activated charcoal filter must be deactivated.
Activating the saturation indicator for the activated charcoal filter
▸ Switch the appliance off.
▸ Hold the and
buttons depressed for 3 seconds.
–
(power level 2) and
(intensive) flash in the display.
▸ The appliance is now configured as a recirculation model.
Deactivating the saturation indicator for the activated charcoal filter
▸ Switch the appliance off.
▸ Hold the and
buttons depressed for 3 seconds.
–
(power level 2) and
(intensive) illuminate in the display.
▸ The appliance is now configured as an extraction model.
3.2
Switching the appliance on
To switch the extractor fan on, the glass
canopy must be pulled out.
▸ Pull the glass canopy completely out.
The appliance is most effective when the glass canopy is fully pulled out.
3.3
Extractor fan
▸ Press the
button to switch the extractor fan on at level 1.
▸ Press the button to switch the extractor fan to level 2.
▸ Press the
button to switch the extractor fan to level 3.
▸ Pressing the
button again switches the extractor fan off.
We recommend switching the appliance on at level 1 some 5 minutes before start-
ing to cook. Leave the appliance running for about 15 minutes after cooking to ex-
tract all the cooking smells.
9
