3 Operating the appliance
3.4
Intensive level
▸ Press the
button to switch the extractor fan to the intensive level.
▸ After 5 minutes, the appliance switches back to (level 2).
▸ Press the
, or
button to stop the intensive level before the 5 minutes has
elapsed.
3.5
After-running time
▸ Switch the appliance on.
▸ Select the desired power level.
▸ Hold the button for the active level depressed for 2 seconds.
–
The relevant power level flashes in the display.
–
While the after-running time is activated, the relevant power level flashes according
to the table below and then switches off automatically.
Power level
After-running time
1
20 minutes
2
15 minutes
3
10 minutes
Intensive
5 minutes
3.6
Illumination
▸ Press the
button to switch the illumination on.
▸ Press the
button repeatedly to switch the illumination off.
The illumination does not switch off automatically when the glass canopy is
pushed in.
3.7
Switching the appliance off
▸ Push the glass canopy completely in.
–
The extractor fan is switched off.
–
The settings are saved.
If the glass canopy is pulled slightly out again, the extractor fan comes on at the
level previously set.
3.8
Saturation indicator
Metal grease filters
When the extractor fan is switched off and the glass canopy is pulled out, all the power
level indicators illuminate for 40 seconds after 40 operating hours. The saturation level
has been reached and the metal grease filters must be cleaned.
10
