V-ZUG DFPQ5, Operating Instructions Manual

Page: 14 / 24

4 Care and maintenance
4 Care and maintenance
4.1 Cleaning the housing
Make sure no water gets inside the appliance. If water gets into the appliance, it
can cause damage.
Do not use abrasive cleaners, scouring pads, steel wool, etc. for cleaning, as they
can damage the surface. Before cleaning the appliance, disconnect the power
supply and switch off the fuse or circuit breaker.
Exterior
▸ Clean using a clean, damp cloth and a mild cleaning agent, then wipe dry.
Interior
Grease and condensate water can build up on the inside around the metal grease filters.
▸ Clean using a clean, damp cloth and a mild cleaning agent, or a soft brush as
needed, then dry well using kitchen towel.
4.2 Metal grease filters
The metal grease filters should be cleaned at least every two months with normal use
(more frequently with intensive use) and whenever the saturation indicator alarm is
triggered. If properly cared for, the grease filters should provide years of service.
Removing
1
2
3
▸ Pull the glass canopy completely out.
▸ Fold down metal grease filters at front and carefully remove from the slots in
the fixture.
Cleaning
▸ Clean the metal grease filters in the dishwasher. Select the «intensive» dishwasher
programme with a warm prewash. If no dishwasher is available: Soak the grease fil-
ters in hot water and mild detergent.
▸ Clean, rinse well with clean cold water and then wipe dry.
– Grease filters can be used again after being cleaned.
14