EN
1
16
INSTALLATION
SNAP-ON FITTING
• The hood can be installed either directly on the bottom surface
of the wall units using snap-on side supports.(min. 650 mm
above the hob).
• Cut a fitted opening in the bottom surface of the wall unit, as
shown.
• Insert the hood until the side supports snap into place.
• Lock in position by tightening the screws
Vf
from underneath
the hood.
13
259
497 - 677
Vf
SCREWS FITTING
• The hood can be installed either directly on the bottom surface
of the wall units using snap-on side supports.(min. 650 mm
above the hob).
• Cut a fitted opening in the bottom surface of the wall unit, as
shown.
• Insert the hood until the side supports snap into place.
• Lock in position by tightening the screws
Vf
from un-derneath
the hood.
• Fix using the 10 or 8 screws
12a
provided.
13
259
497 - 677
12a