manualshive.com logo in svg

V-ZUG CSTXSL60, Operating Instructions Manual, Page: 59 / 88

Share
Download
V-ZUG CSTXSL60 Operating Instructions Manual Download Page 59

11 User settings

Time display

With the «Show time» setting (factory setting), the time is dimmed between
00:00 and 06:00 (24-hour format) or 12:00 a.m. and 06:00 a.m. (12-hour
format).
If «Hide time» is selected, the displays are not illuminated when the appliance
is off.

To reduce power consumption to a minimum, select «Hide time» in
the user settings. Despite automatic energy-saving stand-by, all safety
functions are active.

Mains synchronisation

Mains synchronisation synchronises the appliance clock with the mains fre-
quency. Irregular mains frequency can cause the clock to not run correctly. A
pulse generator inside the appliance is used when mains synchronisation is
switched off.

11.6 

Notifications

Acoustic signals and instruction messages can be switched off or disabled.

11.7 

Descaling the appliance

This function can be used to descale the appliance or read the remaining op-
erating time until the next descaling process.

See Descaling (see page 67).

11.8 

Water hardness

The appliance features a system that automatically indicates when it is time to
descale. The system can be optimised for households with soft water (also
through using a water softening appliance) and medium water hardness by
changing the user settings to the relevant range of water hardness.
There are three settings for water hardness: 

Type

Water hardness

[°fH]

Water hardness

[°dH]

Water hardness

[°eH]

•

Hard

36 to 50

21 to 28

26 to 35

•

Medium

16 to 35

9 to 20

12 to 25

•

Soft

1 to 15

1 to 8

1 to 11

59

Summary of Contents for CSTXSL60

























































































Reviews:

No comments