4 Operation
Saving values
▸ Permanently save and pin the adjusted main value
1
for the selected application (see
page 24), if required.
▸ Touch
and create a favourite (see page 22), if required.
Starting an application
▸ Press «Start» to start the application.
–
The pulsing circle
2
in the CircleSlider indicates that operation has started.
–
The progress bar
3
in the CircleSlider shows the countdown to the time remaining
of the set application, if set.
Stop
55min
13:21
Soft roasting seared
Rare
75°C
35°C
2
3
4.4
Changing an application
If an application has not started yet:
▸ Touch the
function button.
–
The start screen appears (see page 16).
–
A new application can be selected.
If an application is already running:
▸ Press and hold «Stop».
–
The application is cancelled (see page 27).
4.5
Operating time
The operating time can be set, adjusted or cancelled before or during operation. The
application ends automatically when the set duration is up.
Setting the operating time
▸ Select the desired application (see page 16).
▸ In the value range, touch «Operating time» (see page 20).
–
The value range changes to amber.
▸ Set the desired operating time using the CircleSlider.
–
The desired duration and the calculated end time ap-
pear in the display:
15min
13:21
–
If preheating is selected or preset, an approximate duration for preheating is added
at the end.
▸ Press «Start» to start the application.
–
The application starts and the time remaining is displayed.
–
The application ends automatically when the set duration is up (see page 28).
–
If subsequent steps are available for an application, these can be selected when
the set duration is up (see page 29).
17
