![background image](http://html1.mh-extra.com/html/v-zug/combicooktop-v4000-i804/combicooktop-v4000-i804_operating-instructions-manual_3160449033.webp)
9 Trouble-shooting
After heat regeneration in the oven, allow the activated charcoal filter to cool down
before putting it back in the range hood. Risk of burns!
Dispose of activated charcoal filters that are spent and no longer able to be re-
cycled at a suitable recycling point.
Resetting the saturation indicator alarm for the activated charcoal filter
▸ In the display, touch the activated charcoal filter .
–
The «Filter» menu is displayed.
▸ Reset the filter as described.
Filter
Reset activated
charcoal filter
Alternatively, the saturation indicator alarm can also be accessed via the «Filter»
menu of the range hood.
Cleaning the drip tray
▸ Switch the appliance off. The range hood must be
switched off. None of the functions such as after-running
time, CleanAir or room ventilation are activated. The fan
must not be active.
▸ Remove the filter cassette.
▸ First, remove coarse soiling and any liquid that has accu-
mulated in the drip tray with kitchen paper.
▸ Clean the drip tray using a clean, damp cloth and a mild
cleaning agent, or a soft brush as needed, then dry well
using kitchen towel.
9
Trouble-shooting
This section lists faults that can be resolved easily by following the instructions given. If
the fault cannot be remedied, please contact Customer Services. Before contacting Cus-
tomer Services:
▸ please note down the serial number (SN), which is shown on the identification plate,
as well as
▸ the sequence of events that led to the fault.
Display
Possible cause
Solution/Measures
Continuous activation
Release or clean button
▪
A button was touched
for longer than
10 seconds.
▪
There is boiled-over
food on the control
panel.
▸ Remove the object or liquid from the
display.
▸ The appliance can be used again as
normal.
33