6 Operating the range hood
Setting the OptiLink
▸ Hold depressed for 2 seconds or touch 2×.
▸ Select the «OptiLink» menu item with or .
▸ Touch the required mode and confirm with
.
–
When OptiLink is activated, the ,
or symbols
above are displayed.
OptiLink
Standard
How the range hood behaves when OptiLink is activated
When OptiLink is switched on:
– The range hood switches on at extraction power level 1 as soon as a power level is
assigned to a cooking zone. According to the mode selected, level 1 on the range
hood is adjusted to the power level of the hob.
– The range hood controls the extraction power level in line with the current setting
on the hob.
Manual operation
– If the hob is switched on and no cooking zones are in operation, then the room
ventilation function can be operated manually.
Manual overriding
– When the hob is switched on and OptiLink is activated, manual overriding is pos-
sible at all times. Three minutes after the last entry, OptiLink resumes control.
After-running time (only if function is turned on)
– Details about after-running time (see page 25).
– The after-running time function is activated as soon as the cooking process ends.
–
illuminates when after-running time is activated.
6.6
CleanAir
With this function, the range hood is regularly switched on after operation in order to re-
move unpleasant odours from the air.
The following settings are available for selection:
OFF
CleanAir is switched off
Standard
Normal mode. The range hood is switched on at level 1 every
60 minutes for 10 minutes. The function is not time-limited.
Intensive
The range hood runs at level 1 for 8 hours to remove stubborn
odours such as fish and fondue.
Setting CleanAir
▸ Hold or depressed for 2 seconds or touch 2×.
▸ Select the «CleanAir» menu item with or .
▸ Make selection and confirm with
.
–
When the function is active, the CleanAir display is il-
luminated.
CleanAir
Standard
24
