5 Using the appliance
5.3
Setting a duration
The operating mode selected ends automatically when the operating time is up.
▸ Select the desired operating mode.
▸ Select
in the operating mode settings.
▸ Set the desired duration – max. 9 hours and 59 minutes – and confirm.
–
The duration is displayed in the operating mode settings as well as the end time
which is calculated based on this value.
–
End of operation / duration finished (see page 21)
5.4
Setting a delayed start / end time
The delayed start is activated when for the operating mode selected both the duration
and the end time are set.
The appliance switches automatically on and off again at the desired times.
If you use the food probe, you will need to estimate and set the duration. You will find a
guide on times in «EasyCook». The appliance switches on with a delay and switches off
again when the set target temperature is reached. Depending on the estimated duration,
this can occur earlier or later than the set end time.
Perishables should not be kept unrefrigerated.
Before setting the delayed start
▸ Place the food in the cooking space.
▸ Select the desired operating mode.
▸ Set the temperature.
▸ Set the duration.
Setting a delayed start
▸ Select
in the operating mode settings.
–
The current end time calculated using the duration is displayed.
▸ Set the desired end and confirm.
–
The time remaining to the start of operation is displayed.
–
After 3 minutes, the display goes out and the
touch button is illuminated in
white. The display can be called up again at any time by pressing the adjusting
knob.
–
The appliance remains switched off until 3 minutes before the automatic start of op-
eration.
▸ Check and change the settings (see page 17).
Example
▸ Select the
operating mode and 180°C.
▸ At 8:00, set a duration of 1 hour and 15 minutes.
▸ Set the end time to 11:30.
–
The appliance will automatically switch on at 10:15 and off again at 11:30.
18
