background image

3 Operating the appliance

Reset the saturation indicator after cleaning.

▸ Switch the appliance and the illumination off.
▸ Hold the 

 button depressed for 5 seconds.

The 

 or 

 symbols in the display go out.

Only activate the saturation indicator for the activated charcoal filter if the appli-
ance is being used in the recirculation mode. For more details, see: Using for the
first time (see page 10).

3.8 

OptiLink

With this function, the user no longer needs to control the range hood manually. OptiLink
monitors the power levels set for the cooking zones and automatically sets the optimum
power level for the range hood.
The following settings are available for selection: 

-

OFF

OptiLink is turned off

Silent mode

Low noise level operation

Standard mode

Normal mode

Intensive mode

High power for extracting cooking fumes and

smells

Establishing a connection from the range hood to the hob

The range hood can only be connected to hobs that have the OptiLink function.

▸ For activating the «connecting mode» on the hob: see the operating instructions for

the hob.

▸ For activating the «connecting mode» on the range hood:
▸ Switch the appliance and the illumination off.
▸ With the appliance switched off, hold the 

 button depressed for 5 seconds.

The 

 display symbol flashes when the «connecting mode» is active.

If a connection could be established to the hob, 

 illuminates for 10 seconds and

then the range hood is ready for both OptiLink and manual operation.

– If no connection could be established, the 

 display symbol stops flashing. In this

case, another attempt at establishing a connection can be made.

▸ If a connection could be established, this must be confirmed on the hob. See the op-

erating instructions for the hob for this.

The buttons and operating elements on the range hood are deactivated during the
connection process.

A range hood may be connected to as many as three hobs. And a single hob may
be simultaneously connected to several range hoods. Establishing a connection
requires appliances are equipped with OptiLink.

13

Summary of Contents for AiroClearWall V6000

























Reviews: