![background image](http://html1.mh-extra.com/html/v-zug/adoradry-v2000/adoradry-v2000_operating-instructions-manual_3114573017.webp)
5 Operating the appliance
5.5
Checking and changing the settings
▸ Touch the
button in the Additional functions
menu.
–
The start screen appears in the TouchDisplay.
▸ Select a new programme (see page 15).
▸ To make a change once a programme has star-
ted, the programme must be ended before time.
Extra dry
2 h 52
5.6
Duration remaining indicator
When the programme starts, the programme dura-
tion at maximum load is displayed. The actual load
is determined and the expected duration remaining
is calculated, which takes about 1 minute. The letter
«h» flashes and «Determining load» appears in the
display. The expected duration remaining is sub-
sequently displayed.
The programme may possibly take longer than ini-
tially calculated. In this case, the duration remaining
freezes while the programme runs. The letter «h»
flashes again and «Calculating time remaining» ap-
pears in the display.
Extra dry
Calculating time remaining
0 h 59
5.7
Drying phases
The drying process has 3 phases:
▪
Drying:
The laundry is dried as per the settings (programme selection and user set-
tings).
▪
Cooling down / Final airing
: The laundry is cooled down to a temperature at which the
risk of creasing is minimized. The duration of this phase depends on the temperature
of the laundry. «Crease guard» starts if the appliance is not unloaded when this phase
ends.
▪
Crease guard
: The dried laundry is moved at frequent intervals for up to 30 minutes to
prevent creasing. Open the appliance door to end before time.
17