background image

11 Trouble-shooting

Display

Possible cause

Solution

FXX/EXX see in-
structions

SN XXXXX
XXXXXX

Various situations can
lead to this error mes-
sage.

▸ Press the 

 button.

▸ Remove the mains plug from the mains

socket.

▸ Wait for about 1 minute.
▸ Insert the mains plug into the mains

socket again and select a new pro-
gramme.

If the error appears
again:

▸ Note down error message in full and ap-

pliance's SN.

▸ Remove the mains plug from the mains

socket.

▸ Contact Customer Services (see page

39).

UXX/EXX see in-
structions

SN XXXXX
XXXXXX

Overvoltage (U1)

Undervoltage (U2)

▸ Press the 

 button.

▸ Remove the mains plug from the mains

socket.

▸ Wait for about 1 minute.
▸ Insert the mains plug into the mains

socket again and select a new pro-
gramme.

If the error appears
again:

▸ Remove the mains plug from the mains

socket.

▸ Have an electrician check the house in-

stallation.

11.2 

Other possible problems

Problem

Possible cause

Solution

The programme
takes signific-
antly longer
than indicated.

Door filter and/or
door filter mat are
blocked.

▸ Clean door filter and/or door filter mat

(see page 26).

Front filter mat is
clogged.

▸ Clean the front filter mat (see page 27).

Very wet washing.

▸ Spin washing at a higher speed.

The ambient temper-
ature is too high or
too low.

▸ Improve circulation and ventilation of air

in room.

▸ Ensure that the temperature of the room

is between 5 and 35 °C.

No new pro-
gramme can be
selected.

A programme was in-
terrupted.

▸ Press the 

 button.

▸ Select a new programme.

30

Summary of Contents for AdoraDry V2000









































Reviews: