V-ZUG Adora N Operating Instructions Manual Download Page 40 | Manualshive

Page: 40 / 40

V-ZUG Adora N Operating Instructions Manual Download Page 40

Quick start guide

Please first read the safety precautions in the operating instructions!

▸ Open the appliance door.

▸ Load the dishes.

▸ Add the detergent.

▸ Select the programme.

▸ Select any additional function(s) re-

quired.

▸ Close the appliance door. The pro-

gramme starts immediately, or after 15
seconds (depending on model).

▸ When a 3× acoustic signal is emitted or

the display goes out (depending on
model), open the appliance door and
unload the dishes.

Services & support

Register your appliance today online via
our website at www.vzug.com or using the
card supplied and benefit from the best
possible support in the event of a malfunc-
tion – including during the manufacturer's
2-year warranty period. You will require the
serial number (FN) and appliance designa-
tion to register your appliance or to contact
V-ZUG about a fault. You will find them on
the identification plate of your appliance.

You can make your own note of the FN
and appliance designation or note them on
the service sticker which comes with the
appliance:

FN:

______________________________

Appliance:

________________________

Your repair order

Call the free service number
0800 850 850 to be directed to your
nearest V-ZUG Service Centre.

General queries, accessories and service
agreement

V-ZUG will be happy to help you with any
general administrative or technical queries,
to accept your orders for accessories and
spare parts and to inform you about our
progressive service agreements. You can
contact us by calling tel. + 41 58 767 67
67 or by going to our website at
www.vzug.com.

V-ZUG Ltd, Industriestrasse 66, CH-6301 Zug

Tel. +41 58 767 67 67, Fax +41 58 767 61 61

[email protected], www.vzug.com

Service Centre: Tel. 0800 850 850

1011842-R04

«
...
38
39
40

Summary of Contents for Adora N









































Reviews:

No comments