manualshive.com logo in svg

V-ZUG Adora N, Operating Instructions Manual, Page: 16 / 40

Share
Download
V-ZUG Adora N Operating Instructions Manual Download Page 16

4 Operation

4.5 

Detergent

Choice of detergent

Never use washing-up liquid. Heavy foaming can cause malfunctions.
Strictly observe the dosage instructions printed on the packaging and
contact the detergent manufacturer if you have any questions. Using
too high or low a dosage can cause damage to the appliance.

▸ Only use detergent specially formulated for dishwashers.
Tabs may not dissolve properly at a wash temperature of below 55 °C, affecting the cleaning
performance of the appliance.

Combination cleaning products (  tabs/powder)

Continue to use regeneration salt and rinse agent for a good cleaning performance.

▸ Set «All in 1» to   in the user settings. The programmes and displays are adapted to suit

the detergent.

When the   or 

 refill indicators flash, continue to refill with regenera-

tion salt or rinse agent.

▸ If, after washing and drying, the results are not satisfactory, use conventional cleaning

products. Set «All in 1» to   in the user settings. For complaints, contact the detergent
manufacturer.

16

Summary of Contents for Adora N









































Reviews:

No comments