5 User settings
If no button is pressed within the next 15 seconds, the user settings are saved and the dis-
play goes out.
5.3
Acoustic signal
Only present on fully and design-integrated appliances.
Display on operating panel:
Factory setting:
Possible settings:
The acoustic signal can be turned off or
on. In the event of a malfunction, an
acoustic signal is emitted even in the off
mode.
▪
Off
▪
Low
▪
High
5.4
All in 1
Display on operating panel:
Factory setting:
Possible settings:
The programmes must be adapted for
use with detergent with integrated salt
and rinse agent function. The duration of
very short programmes is extended be-
cause such detergent takes longer to
dissolve.
▪
Off
▪
On
products are not suitable for all degrees of water hardness. Follow
the detergent manufacturer’s instructions. When the or
refill indic-
ators flash, continue to refill with regeneration salt or rinse agent.
5.5
Water hardness
Display on panel:
Factory setting:
Possible settings:
The water hardness setting can be
changed to suit local conditions. Contact
your local water authority or see
www.trinkwasser.ch for the relevant in-
formation.
▪
Off
▪
– Level 1–9
Water hardness levels
Level
0
1
2
3
4
5
6
7
8
9
°fH
0–5
6–10
11–15 16–20 21–25 26–30 31–40 41–50 51–70 71–120
°dH
0–3
4–6
7–9
10–12 13–14 15–16 17–22 23–27 28–38
39–65
5.6
Rinse agent dosage
Display on operating panel:
Factory setting
Possible settings:
If the drying result is unsatisfactory, the
dosage can be either turned off or set to
one of 9 levels.
▪
Off
▪
– Level 1–9
23